Â
Shop By
- Manufacturer
- Product Line/Type
- Material
Part Finder
Axles & Stubs
-
DSS LX 2009-2010 5.7 (Non-Getrag) 1400HP Full Chromoly Level 5 Direct Bolt-In Axle -Left
$708.74Shipment Due On: N/A - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Mopar 300 C 2009-2010,
Mopar Challenger R/T 2009-2010,
Mopar Charger R/T 2009-2010 -
GTO Billet Outer Stubs - .5" Inward Offset - Requires 12mm Press-In Studs*
$749.00*Studs for all GTO Outer Stubs sold separatelyShipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO Billet Outer Stubs - .5" Inward Offset - Requires 5/8" Screw-In Studs*
$749.00*Replacement wheel hub bearings will be needed when installing new outer stubsShipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO .5" Rear Brake Caliper Spacers - For use with .50" offset outer stubs
$50.00*Studs for all GTO Outer Stubs sold separatelyShipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO Billet Outer Hub Flanges - Requires GForce Outer Stubs - Will not work with OEM Outer Stubs
$365.00*Studs for all GTO Outer Stubs sold separatelyShipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO VZ 9" IRS Kit - Iron Center Section - 3.5" Alum Driveshaft - OEM Outer Stubs
$6,098.009" kits are not guaranteed to work with factory exhaust, and may require modification for driveshaft clearance
Shipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO VZ 9" IRS Kit - Alum Center Section - 4.0" Alum Driveshaft - OEM Outer Stubs
$6,498.009" kits are not guaranteed to work with factory exhaust, and may require modification for driveshaft clearance
Â
Shipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO VZ 9" IRS Kit - Alum Center Section - 3.75" Carbon Driveshaft - Billet Outer Stubs/Billet Hub Flanges
$7,799.009" kits are not guaranteed to work with factory exhaust, and may require modification for driveshaft clearance
Â
Shipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO VZ Renegade Axles (Axle bar and CV's only)
$999.00The all new GForce Engineering Renegade Axles are a direct replacement for factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. The Renegade axles are leap above entry level axles.
Fitment: Pontiac GTO 2004-2006 -
GTO Billet Outer Stubs - Standard Offset - Requires 5/8" Screw-In Studs*
$699.00*Replacement wheel hub bearings will be needed when installing new outer stubsShipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
Fitment: Chevrolet Camaro ZL1 2012-2015 -
DSS LX 2009-2010 5.7 (Non-Getrag) 1400HP Full Chromoly Level 5 Direct Bolt-In Axle -Right
$708.74Shipment Due On: N/A - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Mopar 300 C 2009-2010,
Mopar Challenger R/T 2009-2010,
Mopar Charger R/T 2009-2010 -
DSS LX 2005-2008 Charger 5.7/300C 5.7/Magnum 5.7/Challenger 5.7 600HP Level 2 Axle -Left
$566.99Shipment Due On: N/A - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Mopar 300 C 2005-2008,
Mopar Challenger R/T 2008,
Mopar Charger R/T 2006-2008,
Mopar Magnum R/T 2005-2008 -
DSS LX 2005-2008 Charger 5.7/300C 5.7/Magnum 5.7/Challenger 5.7 600HP Level 2 Axle -Right
$566.99Shipment Due On: N/A - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Mopar 300 C 2005-2008,
Mopar Challenger R/T 2008,
Mopar Charger R/T 2006-2008,
Mopar Magnum R/T 2005-2008 -
DSS LX 2005-2008 Charger SRT-8/300C SRT-8/Challenger SRT-8/Magnum SRT-8 600HP Level 2 Axle -Left
$661.491 Available as of 9/12 - Available to Order
Fitment: Mopar 300 SRT8 2005-2008,
Mopar Challenger SRT8 2008,
Mopar Charger SRT8 2006-2008,
Mopar Magnum SRT8 2005-2008 -
DSS LX 2005-2008 Charger SRT-8/300C SRT-8/Challenger SRT-8/Magnum SRT-8 600HP Level 2 Axle -Right
$661.491 Available as of 9/12 - Available to Order
Fitment: Mopar 300 SRT8 2005-2008,
Mopar Challenger SRT8 2008,
Mopar Charger SRT8 2006-2008,
Mopar Magnum SRT8 2005-2008 -
DSS LX 2009-2014 (with Getrag Diff) 1400HP Chromoly Level 5 Axle -Left
$755.99Shipment Due On: 4-Oct - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Mopar 300 SRT8 2009-2014,
Mopar Challenger SRT8 2009-2014,
Mopar Charger SRT8 2009-2014 -
DSS LX 2009-2014 (with Getrag Diff) 1400HP Chromoly Level 5 Axle -Right
$755.99Shipment Due On: 4-Oct - Made to Order
Fitment: Mopar 300 SRT8 2009-2014,
Mopar Challenger SRT8 2009-2014,
Mopar Charger SRT8 2009-2014 -
DSS LC 2015+ Hellcat / SRT8 1400HP Full Chromoly Level 5 Direct Bolt-In Axle -Left
$755.996 Available as of 9/12 - Available to Order
Fitment: Mopar Challenger Hellcat 2015-2017,
Mopar Charger Hellcat 2015-2017 -
GTO 50093-HK Rear Axle Shaft Bolt Kit - 50mm (Stock Axles Only) (Replaces 92180093)
$34.99Per Set- Secures the Halfshafts to the Stubs
- Contains 24 12.9 Grade Allen Bolts
- Blue Threadlocker Recommended
2 Available as of 9/12 - In Stock - Ready to Ship
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 1400HP 300m Axle Kit with 300m 108mm Bolt-on Inner Stubs
$1,370.24Per PairHere is our newly redesigned 1400HP Axle / Inner Stub kit. This set of axles has the thicker Porsche style 108mm CV with full 4340 cage (not just chromoly ) internals that is significantly stronger than the factory design. These axles feature our new 1-1/4" OD 30 spline modified 300m bars (our 300m is made and certified to higher torsional standard than most 300m material),
This has rolled spline and are in all of the 8 second GTO's (every record holing one) rolling splines is like forging them, its material compressed.Shipment Due On: 4-Oct - Made to Order
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 Anti-Wheel Hop 1000Hp Axles
$803.24Per PairWhat we have done different is this, our skinny bar is smaller in diameter than a standard 28 spline a stock 108mm CV would use and its made from 300m, We have rolled the spline onto a ground piece of the material that during the rolling process raises the spline above the center diameter of the bar (this is done with all rolled splines DSS uses), what this also does is allow us to make the axle with out any internal snap ring (no internal groove for a square edged stress riser during torsional shock loading) We then make the Big bar1 Available as of 9/12 - Available - Ready to Ship
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 Direct fit Chromoly Wheel Flanges
$661.49Per PairDirect fit billet 4340 wheel flanges for the GTO / Holden. Made from high grade aircraft quality material, carbon ausse tempered. Price is for a pair and includes ARP wheel studs.Shipment Due On: N/A - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 1400HP Axle -with larger 30- Spline bars
$472.49Per AxleThis is our upgraded 1400HP rear axle set for the GTO platform. This set of axles has the thicker Porsche style 108mm CV and hardware that is 30% stronger than the factory design. These axles feature our new 1-3/8" OD 300m 30 spline bars which are significantly larger than any other axle on the market today. Lets say that again, this is a 30 spline axle (not just 28 like other manufacturers). These axles also have a greater advantage of certified 4340AQ cages (not just chromoly). It also has a certified 300m center race that is without a doubt one the of strongest CV races in the industry. This is a direct fit axle and will handle most powerful street and track cars. These axles will bolt directly to the factory differential stubs and include new hardware for installation. Rated to 1400HP. You know who runs our axles and why. The question is why dont you?Shipment Due On: N/A - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 1000HP Axle -with 300m 1-1/8in torsional center bars
$377.99Per AxleThis is our upgraded 1000HP rear axle set for the GTO platform. This set of axles has the thicker Porsche style 108mm CV and hardware that is 40% stronger than the factory design. These axles feature our new 300m center bars with rolled splines. For those of you that dont know rolled splines are stronger than the traditional cut splines. They are as much as 35% stronger than a standard cut spline along with better fitment. This set of axles has a chromoly cage (just like some of the other manufacturers "high end" axles. Add our 4340 Stubs and you have complete system capable of breaking the diff. Need something stronger ? check out our 30 spline 300m axles or the new 9" (also with the 30 spline 300m bars)Shipment Due On: 9-Aug - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 600HP Axle with 1-1/8in Torsional Center Bar
$330.74Per AxleGTO 2004-2006
600HP Axle with 1-1/8in Torsional Center BarShipment Due On: 20-Sep - Made to Order
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 300M 108mm Stub for Stock Diff w/ Replaceable Spline Section - Left
$259.86GTO 2004-2006
GTO 300M 108mm Stubs for Stock Differential with Replaceable Spline SectionShipment Due On: N/A - Made to Order
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 300M 108mm Stub for Stock Diff w/ Replaceable Spline Section - Right
$259.86GTO 2004-2006
GTO 300M 108mm Stubs for Stock Differential with Replaceable Spline Section1 Available as of 9/12 - Available - Ready to Ship
Fitment: Pontiac GTO 2004-2006 -
GTO VZ Outlaw Axles (Axle bar and CV's only)
$1,399.00Left & Right- Anti-wheel hop technology
- Direct bolt-in fit and finish
- 31 Spline Severe-duty CV
- Aircraft grade certified alloys
- CNC-Machined In House
- Powder coated axles for corrosion protection
Shipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO Billet Outer Stubs - Standard Offset - Requires 12mm Press-In Studs*
$699.00Left & Right*Studs for all GTO Outer Stubs sold separatelyShipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO VZ Level 2 28 Spline, 1-piece Inner Axle Stubs*
$699.00Left & RightGForce Engineering GTO L2 Axles Stubs are a direct replacement for factory stub-shafts, and are designed for cars with mild bolt-ons to those running superchargers and turbos. Our level-2 GTO 1-piece CNC machined inner stubs are machined from a single piece of billet steel. GForce inner 1-piece stubs are the strongest stub design period. The Level 2 stubs feature a premium alloy for a significant strength advantage over the stock units.
*Studs for all GTO Outer Stubs sold separately
Shipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO VZ CV Bolt Kit, 10M-60M (GForce axles ONLY)
$39.95Per Kit60mm 12.9 grade cv bolts for use with after market cv joints requiring longer than stock bolts.
Heavy duty 12.9 grade black oxide bolts.
Kit replaces all 24 bolts on vehicle.*Not OEM replacement bolts, these are for the thicker aftermarket cv joints*
Shipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
GTO VZ CV Bolt Kit, 10M-50M (Stock axles ONLY)
$39.95Per Kit50mm 12.9 grade cv bolts Replacement bolts for the OEM TTY bolts Same length as stock.
Replace the TTY OEM bolts with these heavy duty 12.9 grade black oxide bolts.
Kit replaces all 24 bolts on vehicle.Shipment Due On: N/A - Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
DSS G8 2008-G8 / CHEVY SS 1400HP Level 5 Axle/Hub Kit
$1,889.99Shipment Due On: N/A - Made to Order
Fitment: Pontiac G8 2008-2009,
Chevrolet SS 2014-2016 -
DSS G8 2008-G8 / CHEVY SS 1000HP Direct Bolt-In Level 4 Axle -Right
$566.99Shipment Due On: 25-Jul - Made to Order - Typically 2-6 Weeks to Ship
Fitment: Pontiac G8 2008-2009,
Chevrolet SS 2014-2016
Copyright© 2018 Wretched Motorsports