Volant 725062 Vortice Throttle Body Spacer 6.2L Camaro SS

$72.00

Available

Only 6 left

Vortice throttle-body spacers are designed to provide additional performance with your factory or Volantins Cool Air Intake system. Manufactured from glass-filled Nylon composite, the Vortice spacers are incredibly strong, yet lightweight and install behind your vehicleins throttle body to promote quicker throttle response and in most applications, provide a slight improvement in fuel efficiency.

Manufacturer: Volant
Part Number: 725062

6 Available as of 3/14/2024

Available to Order
Warehouses:
- Pennsylvania: 2 on 3/14/2024
- Texas: 2 on 3/14/2024
- Nevada: 2 on 3/14/2024

Fitments:
Chevrolet Camaro SS 2010-2015,
Chevrolet Camaro SS 1LE 2013-2015,
Chevrolet Camaro ZL1 2012-2015

Quantity

Description

Description

Details

1. Disconnect the negative battery cable.

2. Remove the breather hose from the air duct and disconnect the MAF sensor harness.

3. Loosen the clamp holding the air duct to the throttle body and air box. Than remove the duct.

4. Remove the 4 10mm bolts holding the throttle body in place and set the throttle body aside.

5. Press the Vortice spacer into the mainfold.

6. Place the gasket between the spacer and the throttle body.

7. Tighten the throttle body to the mainifold using the provided hardware.

8. Reattach the air duct to the throttle body and air box.

9. Reattach the breather hose and MAF sensor harness.

10. Reattach the negative battery cable.

P/N 725062

Chevrolet Camaro

2010 - 2013 6.2L