GTO Suspension Hardware Package - Complete (20% OFF)

Radius Arm to Frame Nuts - * Required

1 x GTO 14432-HK Front Radius Arm Bushing Nut Hardware Kit (Replaces 11094432 x8)   +$7.20

• Includes 8 Small Lock Nuts
• These are the nuts that hold the Forward Radius Bushing to the Subframe

 

Front Swaybar D Bushing Bracket Nuts - * Required

1 x GTO 14596-HK Front Swaybar Frame Bracket Hardware Kit (Replaces 11514596 x4)   +$6.40

Includes 4 Locking Nuts

 

Radius Arm Nut (Forward at Bushing)

• None Required

1 x GTO 16363-HK Front Radius Arm Bushing Nut Hardware Kit (Replaces 11076363 x2)   +$5.60

• Includes 2 Lock Nuts
• This is the Large Center Nut that holds the Radius Arm to the Forward Radius Bushing
• 24mm Hex Size
• Included with Pedders EP9166 Radius Arm Bushings and 5409 Radius Arms

 

Quantity 

Front Lower Control Arms to Subframe - * Required

1 x GTO 18238-HK Front Lower Control Arm Hardware Kit (Replaces 92078238 x2/92138178 x2)   +$11.20

• Replaces the OEM Lower Control Arm Bolts/Nuts
• Fits Both Front Control Arms
• Upgraded from Black Oxide to Yellow Zinc

 

Radius Arm Forward Washers at Arm

• None Required

1 x GTO 19298-HK Radius Arm Forward Washers at Arm (Pair) (Replaces 90079298 x2)   +$24.00

Rearward at the Control Arm,  Goes in front of the control arm bushing between the Radius Arm.

Note: Washer Cups Away from Bushing

 

Quantity 

Strut Mount Jam Nuts

• None Required

1 x GTO/G8 20981-HK Front Strut Mount Jam Nuts (Replaces 11010981 x2)   +$8.00

• Located Above the Upper Strut Mount
• Below the Retaining Plate
• Contains 2 Jam Nuts, One for Each Side

 

Quantity 

Strut Lock Nuts

• None Required

1 x GTO/G8 28740-HK Front Strut Lock Nuts (Per Pair) (Replaces 92138740 x2)   +$20.80

• Above the Strut Retaining Plate
• Contains 2 Lock Nuts, One for Each Side

 

Quantity 

Front Camber Adjuster

• None Required

1 x GTO 28755-HK Front Camber Adjuster Bolt Hardware Kit (Per Pair) (Replaces 92138755 x2)   +$14.40

• Used for Adjusting Camber for Alignments
• MUST USE BLUE LOCTITE
• Replaces the Worn/Rotted OEM Adjusting Bolts

 

Quantity 

Front Strut Clevis Bolts - * Required

1 x GTO/G8 28863-HK Front Lower Strut Mounting Bolt Hardware Kit (Per Set of 4)   +$24.00

• Replaces 92138863 x 4, 11090821 x 4, 92138205 x 4, 92138049 x 4
• Replace with Struts or Coilovers
• Replacement Recommended After Loosening/Tightening a Number of Times
• Includes 4 Hardened Bolts, 4 Hardened Washers and 4 Hardened Locking Nuts
• Upgraded from Black Oxide to Yellow Zinc

 

Power Steering Line O-Rings

• None Required

1 x GTO 31164-HK Steering Rack O-Rings - Lines to Rack (Pair)   +$6.40

• Includes 2 O-Rings for the Lines at the Rack
• Replace when the Lines are disconnected

 

Quantity 

Steering Rack Bolt Kit - * Required

1 x GTO 35953-HK Steering Rack Mount Bolt Kit (Optional Fit: Rear Toe Link) (Replaces 11015953 x2/11092741 x2)   +$11.20

• Primary Fitment: Secures the Steering Rack to the Subframe
  (Replaces 11015953 x2/11092741 x2)
• Optional Fitment: Secures Rear Toe Link to Rear Subframe
  (Replaces 90468842 x 2 / 92228333 x 2)
• Contains two 10.9 Grade Bolts w/Nuts

 

Front Brake Caliper Bracket Bolts

• None Required

1 x GTO 32963-HK Front Caliper Bolt Hardware Kit - 2004 Only (Replaces 92138557/92172963 x4)   +$16.00

• Bolts that Hold the Caliper Bracket to the Knuckle
• Includes 4 Hardened 10.9 Bolts
• Fits 2004 GTO Only
• Upgraded to Yellow Zinc

 

1 x GTO 38238-HK Front Caliper Bolt Hardware Kit - 05-06 (Replaces 11518238 x4/92138897 x4)   +$28.80

• Bolts that Hold the Caliper Bracket to the Knuckle
• Includes 4 Hardened 10.9 Bolts with Nord-Lock Washers
• Fits 2005-2006 GTO Only
• Upgraded from Black Oxide to Yellow Zinc

 

Quantity 

Front Cradle Bolts

• None Required

1 x GTO 38396-HK Front Subframe Bolt Kit (4 Bolts) (Replaces 92138605 x2/92138396 x2)   +$80.00

• Secures Front Sub-Frame/Cradle to the Unibody
• UPDATED: Contains All 4 10.9 Grade Subframe Bolts
• Use in the Forward Location to Allow Cradle Alignment
• Use in the Rearward Location as Replacement Bolts
• Requires Thread Sealant/Locker

 

Quantity 

Rear Swaybar Link - * Required

1 x GTO 45984-HK Rear Sway Bar Link 10.9 Bolt Kit (Both Sides)   +$11.20

• Replace OEM Hardware when Installing Swaybars, or Link Bushings
• 4x 10.9 Hardened Bolts
• 4x 10.9 Hardened Nyloc Nuts
• 4x Upper Washers - (Smaller - Outer / Larger - Inner Between Bar & Bushing)
• Stock Hardware will Break with Aftermarket Swaybars

 

Rear Shock Bolts - * Required

1 x GTO 46304-HK Rear Lower Shock Bolt Hardware Kit (Replaces 92036304 x2/92078237 x2)   +$22.40

• Includes 2 Hardened Bolts, Washers and Lock Nuts
• Bolt is Longer to Allow Use of Nut
• Nut Allows Tightening when Control Arm Threads Strip out, as well as Added Strength

 

Rear Lower Control Arms - Outer Position (Non Adjustable Bushings Only)

• None Required

1 x GTO 47937-HK Rear Lower Control Arm Hardware Kit (Replaces 90447937 x2/92138178 x2)   +$16.00

• Replaces the OEM Lower Control Arm Bolts/Nuts
• Fits Rear Control Arms
• Rear Fitment is for Non Adjustable Bushings Only
• Rear Inner Requires 1 Kit (Non Adjustable Bushings)
• Rear Outer Requires 1 Kit (Non Adjustable Bushings)
• Upgraded from Black Oxide to Yellow Zinc

 

Quantity 

Rear Lower Control Arms - Inner Position (Non Adjustable Bushings Only) - * Required

1 x GTO 47937-HK Rear Lower Control Arm Hardware Kit (Replaces 90447937 x2/92138178 x2)   +$16.00

• Replaces the OEM Lower Control Arm Bolts/Nuts
• Fits Rear Control Arms
• Rear Fitment is for Non Adjustable Bushings Only
• Rear Inner Requires 1 Kit (Non Adjustable Bushings)
• Rear Outer Requires 1 Kit (Non Adjustable Bushings)
• Upgraded from Black Oxide to Yellow Zinc

 

Rear Subframe Bracket Bolt Kit - * Required

1 x GTO 48270-HK Rear Subframe Mount Bracket Bolt Kit (Set of 6) (Replaces 92138270 x6)   +$16.00

• Replaces OEM Bolts
• Includes 6 Bolts
• Fits the 'Triangle Bracket' below the Rear Cradle Bushings
• Upgraded from Black Oxide to Yellow Zinc

 

Rear Diff Mount (To Unibody)

• None Required

1 x GTO 48390-HK Rear Differential Mount 10.9 Bolt Kit (Replaces 92138390 x4)   +$8.00

• Includes 4 x10.9 Hardened Bolts
• Replace with Differential Mount Bushing
• Can also be Used for the Engine Skid Plate
• Upgraded from Black Oxide to Yellow Zinc

 

Quantity 

Rear Subframe Bolts - * Required

1 x GTO 48482-HK Rear Subframe Bolt Hardware Kit (Per Pair) (Replaces 92038482 x2)   +$24.00

• Replace OEM 8.8 Bolts with these Improved 10.9 Bolts
• Integrated Washer Allows for Better Torquability
• Install with Blue Loctitie
• Re-Useable vs OEM Single Use Bolts

 

Rear Swaybar D Bushing Bracket Bolts

• None Required

1 x GTO 48545-HK Rear Sway Bar Frame Bracket Bolt Kit (Replaces 92138545 x2)   +$8.00

• Replaces 92138545
• 2 Slightly Longer than OE Bolts for Easier Installation
• Bolts MAY bottom out slightly
• The GTO only needs 1 bolt per bracket, the other end clips in to the subframe

 

Quantity 

Axle Bolt Kit

• None Required

1 x GTO 50093.50-HK Rear Axle Shaft Bolt Kit - 50mm (Stock Axles Only) (Replaces 92180093 x24)   +$28.00

• Secures the Halfshafts to the Stubs
• Contains 24 12.9 Grade Allen Bolts
• Blue Threadlocker Recommended

 

1 x GTO 50093.60-HK Rear Axle Shaft Bolt Kit - 60mm (Only For Some Aftermarket Axles) (Replaces 92180093 x24)   +$28.00

• Secures the Halfshafts to the Stubs
• Contains 24 60mm Long 12.9 Grade Allen Bolts
• Blue Threadlocker Recommended

 

Quantity 

Differential Mount to Cover Bolt Kit

• None Required

1 x GTO 54012-HK Differential Mount to Carrier Bolt Kit (Replaces 11024012 x2)   +$12.00

These 2 bolts hold the Diff Mount to the Diff Carrier (Pumpkin). (Not the Differential Mount Bolts)

 

Quantity 

Rear Caliper Bracket to Knuckle/Arm 04-06

• None Required

1 x GTO 58127-HK Rear Caliper (Replaces 92138387 x4) / Differential Carrier to Subframe Locking Bolt Kit (Replaces 92138127 x4)   +$40.00

• Fits Rear Caliper Brackets
• Fits Rear Diff to Subframe
• Wide Nordlock Locking Washer Included
• Very High Quality

 

Quantity 

Differential Housing to Subframe Bolt Kit

• None Required

1 x GTO 58127-HK Rear Caliper (Replaces 92138387 x4) / Differential Carrier to Subframe Locking Bolt Kit (Replaces 92138127 x4)   +$40.00

• Fits Rear Caliper Brackets
• Fits Rear Diff to Subframe
• Wide Nordlock Locking Washer Included
• Very High Quality

 

Quantity 

Threadlocker

• None Required

1 x Permatex Medium Strength Threadlocker 6.0 ml Blue   +$8.00

• Locks and seals while preventing parts loosening due to vibration
• Protects threads from corrosion
• Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm)
• Removable with hand tools for easy disassembly

 

Quantity 

* Required Fields