GTO Suspension Hardware Package - Rear (15% OFF)

Rear Swaybar Link - * Required

1 x GTO 45984-HK Rear Sway Bar Link 10.9 Bolt Kit (Both Sides)   +$11.90

• Replace OEM Hardware when Installing Swaybars, or Link Bushings
• 4x 10.9 Hardened Bolts
• 4x 10.9 Hardened Nyloc Nuts
• 4x Upper Washers - (Smaller - Outer / Larger - Inner Between Bar & Bushing)
• Stock Hardware will Break with Aftermarket Swaybars

 

Rear Shock Bolts - * Required

1 x GTO 46304-HK Rear Lower Shock Bolt Hardware Kit (Replaces 92036304 x2/92078237 x2)   +$23.80

• Includes 2 Hardened Bolts, Washers and Lock Nuts
• Bolt is Longer to Allow Use of Nut
• Nut Allows Tightening when Control Arm Threads Strip out, as well as Added Strength

 

Rear Lower Control Arms - Outer Position (Non Adjustable Bushings Only)

1 x GTO 47937-HK Rear Lower Control Arm Hardware Kit (Replaces 90447937 x2/92138178 x2)   +$17.00

• Replaces the OEM Lower Control Arm Bolts/Nuts
• Fits Rear Control Arms
• Rear Fitment is for Non Adjustable Bushings Only
• Rear Inner Requires 1 Kit (Non Adjustable Bushings)
• Rear Outer Requires 1 Kit (Non Adjustable Bushings)
• Upgraded from Black Oxide to Yellow Zinc

 

Rear Lower Control Arms - Inner Position (Non Adjustable Bushings Only) - * Required

1 x GTO 47937-HK Rear Lower Control Arm Hardware Kit (Replaces 90447937 x2/92138178 x2)   +$17.00

• Replaces the OEM Lower Control Arm Bolts/Nuts
• Fits Rear Control Arms
• Rear Fitment is for Non Adjustable Bushings Only
• Rear Inner Requires 1 Kit (Non Adjustable Bushings)
• Rear Outer Requires 1 Kit (Non Adjustable Bushings)
• Upgraded from Black Oxide to Yellow Zinc

 

Rear Subframe Bracket Bolt Kit - * Required

1 x GTO 48270-HK Rear Subframe Mount Bracket Bolt Kit (Set of 6) (Replaces 92138270 x6)   +$17.00

• Replaces OEM Bolts
• Includes 6 Bolts
• Fits the 'Triangle Bracket' below the Rear Cradle Bushings
• Upgraded from Black Oxide to Yellow Zinc

 

Rear Diff Mount (To Unibody) - * Required

1 x GTO 48390-HK Rear Differential Mount 10.9 Bolt Kit (Replaces 92138390 x4)   +$8.50

• Includes 4 x10.9 Hardened Bolts
• Replace with Differential Mount Bushing
• Can also be Used for the Engine Skid Plate
• Upgraded from Black Oxide to Yellow Zinc

 

Rear Subframe Bolts - * Required

1 x GTO 48482-HK Rear Subframe Bolt Hardware Kit (Per Pair) (Replaces 92038482 x2)   +$25.50

• Replace OEM 8.8 Bolts with these Improved 10.9 Bolts
• Integrated Washer Allows for Better Torquability
• Install with Blue Loctitie
• Re-Useable vs OEM Single Use Bolts

 

Rear Swaybar D Bushing Bracket Bolts - * Required

1 x GTO 48545-HK Rear Sway Bar Frame Bracket Bolt Kit (Replaces 92138545 x2)   +$8.50

• Replaces 92138545
• 2 Slightly Longer than OE Bolts for Easier Installation
• Bolts MAY bottom out slightly
• The GTO only needs 1 bolt per bracket, the other end clips in to the subframe

 

Axle Bolt Kit

• None Required

1 x GTO 50093.50-HK Rear Axle Shaft Bolt Kit - 50mm (Stock Axles Only) (Replaces 92180093 x24)   +$29.75

• Secures the Halfshafts to the Stubs
• Contains 24 12.9 Grade Allen Bolts
• Blue Threadlocker Recommended

 

1 x GTO 50093.60-HK Rear Axle Shaft Bolt Kit - 60mm (Only For Some Aftermarket Axles) (Replaces 92180093 x24)   +$29.75

• Secures the Halfshafts to the Stubs
• Contains 24 60mm Long 12.9 Grade Allen Bolts
• Blue Threadlocker Recommended

 

Quantity 

Differential Mount to Cover Bolt Kit

• None Required

1 x GTO 54012-HK Differential Mount to Carrier Bolt Kit (Replaces 11024012 x2)   +$12.75

These 2 bolts hold the Diff Mount to the Diff Carrier (Pumpkin). (Not the Differential Mount Bolts)

 

Quantity 

Rear Caliper Bracket to Knuckle/Arm 04-06

• None Required

1 x GTO 58127-HK Rear Caliper (Replaces 92138387 x4) / Differential Carrier to Subframe Locking Bolt Kit (Replaces 92138127 x4)   +$42.50

• Fits Rear Caliper Brackets
• Fits Rear Diff to Subframe
• Wide Nordlock Locking Washer Included
• Very High Quality

 

Quantity 

Differential Housing to Subframe Bolt Kit

• None Required

1 x GTO 58127-HK Rear Caliper (Replaces 92138387 x4) / Differential Carrier to Subframe Locking Bolt Kit (Replaces 92138127 x4)   +$42.50

• Fits Rear Caliper Brackets
• Fits Rear Diff to Subframe
• Wide Nordlock Locking Washer Included
• Very High Quality

 

Quantity 

Threadlocker

• None Required

1 x Permatex Medium Strength Threadlocker 6.0 ml Blue   +$8.50

• Locks and seals while preventing parts loosening due to vibration
• Protects threads from corrosion
• Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm)
• Removable with hand tools for easy disassembly

 

Quantity 

* Required Fields