TEXT ROB @ WRETCHED - 860-880-0486 (Text Only - No Calls)

Bushing Packages

GTO Pedders Front Bushing Package

Available

As low as: $277.40

Price as configured: $0.00

Manufacturer: Pedders Packages
Part Number: GTO-FBUSH-PKG
Position: Front
Est Labor: 5.0

Package
Contains Multiple Parts

Available to Order
Fitments:
Pontiac GTO 2004-2006


  • The #1 GTO Suspension Failure is OEM Radius Arm Bushings
  • Caster Adjustable using Included Shims
  • Forward Washer Cupped for Better Performance
  • Comes with Forward Center Nyloc Nuts
  • Hardened Crush Tubes
  • Helps Correct Inner Edge Tire Wear & Cupping Issues
 


  • Connects the Rear of the Radius Arm to the Lower Control Arm
  • 2 Piece Bushings for Easy Installation
  • Rear Nut Wrench Size is 30mm
 


  • Front Inner Control Arm to Frame
  • Use with 6500-HK Hardened Bolt Kit
  • 1 Package Per Car
  • Increased Road Feel and Stability
 


  • Installs on Passenger Side of Rack
  • Replaces OEM Rubber Bushing
  • Tightens the Feel of the Steering
  • Installation Requires Removal of the Right Outer Tie Rod
 


  • Heavy Duty Construction
  • Direct OE Fitment
  • High Durability
  • Affordable Price
  • For use with 85mm Diameter Bearings
 


  • Direct OE Fitment
  • High Durability
  • 85mm Diameter
 


  • Stock Bump Stops Should Be Replaced
  • Prevents Strut Damage from Bottoming Out
  • 2 Bump Stops Per Car
  • Fits Struts Only, Not Coilovers.
 


Non KYB Rack Only - 16mm x 2.0 Threads
Fits 2004-2006 GTO up to VIN#  #########6L838608

 


GTO PBJ8036 Lower Balljoint
 


GTO F 401005L Hub Bearing - L
 


GTO F 401005R Hub Bearing - R
 


  • Bolts that Hold the Caliper Bracket to the Knuckle
  • Includes 4 Hardened 10.9 Bolts with Nord-Lock Washers
  • Fits 2005-2006 GTO Only
  • Upgraded from Black Oxide to Yellow Zinc
 


  • Replaces the OEM Lower Control Arm Bolts/Nuts
  • Fits Both Front Control Arms
  • Upgraded from Black Oxide to Yellow Zinc
 


  • Replaces 92138863 x 4, 11090821 x 4, 92138205 x 4, 92138049 x 4
  • Replace with Struts or Coilovers
  • Replacement Recommended After Loosening/Tightening a Number of Times
  • Includes 4 Hardened Bolts, 4 Hardened Washers and 4 Hardened Locking Nuts
  • Upgraded from Black Oxide to Yellow Zinc
 


  • Used for Adjusting Camber for Alignments
  • MUST USE BLUE LOCTITE
  • Replaces the Worn/Rotted OEM Adjusting Bolts
 


  • Includes 2 O-Rings for the Lines at the Rack
  • Replace when the Lines are disconnected
 


  • Secures Front Sub-Frame/Cradle to the Unibody
  • UPDATED: Contains All 4 10.9 Grade Subframe Bolts
  • Use in the Forward Location to Allow Cradle Alignment
  • Use in the Rearward Location as Replacement Bolts
  • Requires Thread Sealant/Locker
 


  • Locks and seals while preventing parts loosening due to vibration
  • Protects threads from corrosion
  • Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm)
  • Removable with hand tools for easy disassembly
 

* Required Fields

Price as configured: $0.00