GTO Pedders Sport Xa Package

Coilovers - * Required

1 x GTO Pedders 160033 Xa Coilovers w/Mounts   +$1,197.00

Fixed Ratio Bound/Rebound Adjustable with Single Knob Adjustment

Included:
Front Upper Strut Mount Bearings
Front Sway Bar Links
Front Upper Strut Mounts
Rear Upper Shock Mounts

Front Spring Rate: 7 kg/mm
Rear Spring Rate: 8 kg/mm

 

1 x GTO Pedders 164033 Xa Supercar Coilovers w/ Remote Canisters w/Mounts   +$1,966.50

Independent Bound/Rebound Adjustable with Two Knob Adjustment

Included:
Front Upper Strut Mount Bearings
Front Swaybar Links
Front Upper Strut Mounts
Rear Upper Shock Mounts

 

Quantity 

Rear Spring Pads (Optional)

2 x GTO Rear 6mm Spring Spacer Pad - EP386/6   +$51.30

GTO R 6mm Spring Spacer Pad

 

2 x GTO Rear 10mm Spring Spacer Pad - EP386/10   +$58.90

GTO R 10mm Spring Spacer Pad

 

Front Swaybar - * Required

1 x GTO Front 30mm Adjustable Swaybar - 428005-30   +$230.85

GTO Front 30mm Adjustable Swaybar
Includes Poly D Bushings

 

Rear Swaybar - * Required

1 x GTO Rear 19mm Adjustable Swaybar - 429005-20   +$188.10

2 Adjustment Holes
Comes with Pedders D Bushings
19mm Diameter

 

Rear Swaybar End Link Bushings

2 x GTO Whiteline Rear Sway Bar Link Bushings (Per Link) - W23034   +$45.60

• Replaces OEM Rubber Bushings
• Includes 2 Piece Bushings with New Ferrules
• 1 Kit per Swaybar Link (2 Kits Per Car Required)
• Use with 513-HK Hardened Hardware Kit

 

Hardware & Misc

1 x GTO/G8 28863-HK Front Lower Strut Mounting Bolt Hardware Kit (Per Set of 4)   +$28.50

• Replaces 92138863 x 4, 11090821 x 4, 92138205 x 4, 92138049 x 4
• Replace with Struts or Coilovers
• Replacement Recommended After Loosening/Tightening a Number of Times
• Includes 4 Hardened Bolts, 4 Hardened Washers and 4 Hardened Locking Nuts
• Upgraded from Black Oxide to Yellow Zinc

 

1 x GTO 31164-HK Steering Rack O-Rings - Lines to Rack (Pair)   +$7.60

• Includes 2 O-Rings for the Lines at the Rack
• Replace when the Lines are disconnected

 

1 x GTO 48482-HK Rear Subframe Bolt Hardware Kit (Per Pair) (Replaces 92038482 x2)   +$28.50

• Replace OEM 8.8 Bolts with these Improved 10.9 Bolts
• Integrated Washer Allows for Better Torquability
• Install with Blue Loctitie
• Re-Useable vs OEM Single Use Bolts

 

1 x GTO 48390-HK Rear Differential Mount 10.9 Bolt Kit (Replaces 92138390 x4)   +$9.50

• Includes 4 x10.9 Hardened Bolts
• Replace with Differential Mount Bushing
• Can also be Used for the Engine Skid Plate
• Upgraded from Black Oxide to Yellow Zinc

 

1 x GTO 46304-HK Rear Lower Shock Bolt Hardware Kit (Replaces 92036304 x2/92078237 x2)   +$26.60

• Includes 2 Hardened Bolts, Washers and Lock Nuts
• Bolt is Longer to Allow Use of Nut
• Nut Allows Tightening when Control Arm Threads Strip out, as well as Added Strength

 

1 x GTO 45984-HK Rear Sway Bar Link 10.9 Bolt Kit (Both Sides)   +$13.30

• Replace OEM Hardware when Installing Swaybars, or Link Bushings
• 4x 10.9 Hardened Bolts
• 4x 10.9 Hardened Nyloc Nuts
• 4x Upper Washers - (Smaller - Outer / Larger - Inner Between Bar & Bushing)
• Stock Hardware will Break with Aftermarket Swaybars

 

1 x GTO 16363-HK Front Radius Arm Bushing Nut Hardware Kit (Replaces 11076363 x2)   +$6.65

• Includes 2 Lock Nuts
• This is the Large Center Nut that holds the Radius Arm to the Forward Radius Bushing
• 24mm Hex Size
• Included with Pedders EP9166 Radius Arm Bushings and 5409 Radius Arms

 

1 x GTO 18238-HK Front Lower Control Arm Hardware Kit (Replaces 92078238 x2/92138178 x2)   +$13.30

• Replaces the OEM Lower Control Arm Bolts/Nuts
• Fits Both Front Control Arms
• Upgraded from Black Oxide to Yellow Zinc

 

1 x GTO 28755-HK Front Camber Adjuster Bolt Hardware Kit (Per Pair) (Replaces 92138755 x2)   +$17.10

• Used for Adjusting Camber for Alignments
• MUST USE BLUE LOCTITE
• Replaces the Worn/Rotted OEM Adjusting Bolts

 

1 x GTO/G8 20981-HK Front Strut Mount Jam Nuts (Replaces 11010981 x2)   +$9.50

• Located Above the Upper Strut Mount
• Below the Retaining Plate
• Contains 2 Jam Nuts, One for Each Side

 

1 x GTO 38238-HK Front Caliper Bolt Hardware Kit - 05-06 (Replaces 11518238 x4/92138897 x4)   +$34.20

• Bolts that Hold the Caliper Bracket to the Knuckle
• Includes 4 Hardened 10.9 Bolts with Nord-Lock Washers
• Fits 2005-2006 GTO Only
• Upgraded from Black Oxide to Yellow Zinc

 

1 x GTO 38396-HK Front Subframe Bolt Kit (4 Bolts) (Replaces 92138605 x2/92138396 x2)   +$95.00

• Secures Front Sub-Frame/Cradle to the Unibody
• UPDATED: Contains All 4 10.9 Grade Subframe Bolts
• Use in the Forward Location to Allow Cradle Alignment
• Use in the Rearward Location as Replacement Bolts
• Requires Thread Sealant/Locker

 

2 x GTO 47937-HK Rear Lower Control Arm Hardware Kit (Replaces 90447937 x2/92138178 x2)   +$38.00 Quantity 

• Replaces the OEM Lower Control Arm Bolts/Nuts
• Fits Rear Control Arms
• Rear Fitment is for Non Adjustable Bushings Only
• Rear Inner Requires 1 Kit (Non Adjustable Bushings)
• Rear Outer Requires 1 Kit (Non Adjustable Bushings)
• Upgraded from Black Oxide to Yellow Zinc

 

1 x GTO 48270-HK Rear Subframe Mount Bracket Bolt Kit (Set of 6) (Replaces 92138270 x6)   +$19.00

• Replaces OEM Bolts
• Includes 6 Bolts
• Fits the 'Triangle Bracket' below the Rear Cradle Bushings
• Upgraded from Black Oxide to Yellow Zinc

 

1 x Permatex Medium Strength Threadlocker 6.0 ml Blue   +$9.50

• Locks and seals while preventing parts loosening due to vibration
• Protects threads from corrosion
• Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm)
• Removable with hand tools for easy disassembly

 

* Required Fields