Shop By
- Front / Rear
- Labor Skill Level
- Product Line/Type
Part Finder
TEXT ROB @ WRETCHED - 860-880-0486 (Text Only - No Calls)
Drivetrain
-
Manual Transmission Fluid - When Dex III Specified - GTO
$12.99Required for GTO Manual Transmissions that are labeled "DEX III Only"
Also Used for GTO Power Steering Systems.Using Dex VI fluids in GTO's can cause issues.
Contact Us for Availability
Fitment: Pontiac GTO 2004-2006 -
04-06 Skip Shift Eliminator
$15.00Each2004-2006 Pontiac GTO skip-shift eliminator. •100% Plug n Play Design •Made for 6 Spd Manual Trans •Resistor sealed in OE Heat Shrink •Assembled with Quality Original Hardware Also for 94-02 Pontiac Firebird Trans Am and 09 G8s with T56 trans.Fitment: Pontiac GTO 2004-2006 -
Fitment: Pontiac GTO 2004-2006,
Chevrolet Camaro 1998-2002,
Chevrolet Corvette 1998-2004 -
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 1400HP 300m Axle Kit with 300m 108mm Bolt-on Inner Stubs
$1,507.27Per PairHere is our newly redesigned 1400HP Axle / Inner Stub kit. This set of axles has the thicker Porsche style 108mm CV with full 4340 cage (not just chromoly ) internals that is significantly stronger than the factory design. These axles feature our new 1-1/4" OD 30 spline modified 300m bars (our 300m is made and certified to higher torsional standard than most 300m material),
This has rolled spline and are in all of the 8 second GTO's (every record holing one) rolling splines is like forging them, its material compressed.Shipment Due On: 12/31/2020 - Made to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 Anti-Wheel Hop 1000Hp Axles
$883.57Per PairWhat we have done different is this, our skinny bar is smaller in diameter than a standard 28 spline a stock 108mm CV would use and its made from 300m, We have rolled the spline onto a ground piece of the material that during the rolling process raises the spline above the center diameter of the bar (this is done with all rolled splines DSS uses), what this also does is allow us to make the axle with out any internal snap ring (no internal groove for a square edged stress riser during torsional shock loading) We then make the Big bar12 Available as of 10/26/2020
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 Direct fit Chromoly Wheel Flanges
$661.49Per PairDirect fit billet 4340 wheel flanges for the GTO / Holden. Made from high grade aircraft quality material, carbon ausse tempered. Price is for a pair and includes ARP wheel studs.Made to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 1400HP Axle -with larger 30- Spline bars
$472.49Per AxleThis is our upgraded 1400HP rear axle set for the GTO platform. This set of axles has the thicker Porsche style 108mm CV and hardware that is 30% stronger than the factory design. These axles feature our new 1-3/8" OD 300m 30 spline bars which are significantly larger than any other axle on the market today. Lets say that again, this is a 30 spline axle (not just 28 like other manufacturers). These axles also have a greater advantage of certified 4340AQ cages (not just chromoly). It also has a certified 300m center race that is without a doubt one the of strongest CV races in the industry. This is a direct fit axle and will handle most powerful street and track cars. These axles will bolt directly to the factory differential stubs and include new hardware for installation. Rated to 1400HP. You know who runs our axles and why. The question is why dont you?Made to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 1000HP Axle -with 300m 1-1/8in torsional center bars
$415.79Per AxleThis is our upgraded 1000HP rear axle set for the GTO platform. This set of axles has the thicker Porsche style 108mm CV and hardware that is 40% stronger than the factory design. These axles feature our new 300m center bars with rolled splines. For those of you that dont know rolled splines are stronger than the traditional cut splines. They are as much as 35% stronger than a standard cut spline along with better fitment. This set of axles has a chromoly cage (just like some of the other manufacturers "high end" axles. Add our 4340 Stubs and you have complete system capable of breaking the diff. Need something stronger ? check out our 30 spline 300m axles or the new 9" (also with the 30 spline 300m bars)Made to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 2004-2006 600HP Axle with 1-1/8in Torsional Center Bar
$363.82Per AxleGTO 2004-2006
600HP Axle with 1-1/8in Torsional Center Bar1 Available as of 10/26/2020
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 300M 108mm Stub for Stock Diff w/ Replaceable Spline Section - Left
$259.86GTO 2004-2006
GTO 300M 108mm Stubs for Stock Differential with Replaceable Spline SectionMade to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac GTO 2004-2006 -
DSS GTO 300M 108mm Stub for Stock Diff w/ Replaceable Spline Section - Right
$259.86GTO 2004-2006
GTO 300M 108mm Stubs for Stock Differential with Replaceable Spline SectionMade to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac GTO 2004-2006 -
GTO VZ Outlaw Axles (Axle bar and CV's only)
$1,399.00Left & Right- Anti-wheel hop technology
- Direct bolt-in fit and finish
- 31 Spline Severe-duty CV
- Aircraft grade certified alloys
- CNC-Machined In House
- Powder coated axles for corrosion protection
Dropships from Gforce
Fitment: Pontiac GTO 2004-2006 -
GTO VZ Level 2 28 Spline, 1-piece Inner Axle Stubs*
$699.00Left & RightGForce Engineering GTO L2 Axles Stubs are a direct replacement for factory stub-shafts, and are designed for cars with mild bolt-ons to those running superchargers and turbos. Our level-2 GTO 1-piece CNC machined inner stubs are machined from a single piece of billet steel. GForce inner 1-piece stubs are the strongest stub design period. The Level 2 stubs feature a premium alloy for a significant strength advantage over the stock units.
*Studs for all GTO Outer Stubs sold separately
Dropships from Gforce
Fitment: Pontiac GTO 2004-2006 -
GTO VZ Renegade Axles (Axle bar and CV's only)
$999.00Left & RightThe all new GForce Engineering Renegade Axles are a direct replacement for factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. The Renegade axles are leap above entry level axles.
Dropships from Gforce
Fitment: Pontiac GTO 2004-2006 -
GTO VZ 9" IRS Kit - Iron Center Section - 3.5" Alum Driveshaft - OEM Outer Stubs
$6,098.009" kits are not guaranteed to work with factory exhaust, and may require modification for driveshaft clearance
Dropships from Gforce
Fitment: Pontiac GTO 2004-2006 -
GTO VZ 9" IRS Kit - Alum Center Section - 4.0" Alum Driveshaft - OEM Outer Stubs
$6,498.009" kits are not guaranteed to work with factory exhaust, and may require modification for driveshaft clearance
Dropships from Gforce
Fitment: Pontiac GTO 2004-2006 -
DSS G8 2008-G8 / CHEVY SS 1400HP Level 5 Axle/Hub Kit
$2,078.99Made to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac G8 2008-2009,
Chevrolet SS 2014-2016 -
DSS G8 2008-G8 / CHEVY SS 1000HP Direct Bolt-In Level 4 Axle -Right
$623.69Shipment Due On: 12/18/2020 - Made to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac G8 2008-2009,
Chevrolet SS 2014-2016 -
Fitment: Pontiac G8 2008-2009,
Chevrolet SS 2014-2017 -
DSS G8 2008-G8 / CHEVY SS 1000HP Direct Bolt-In Level 4 Axle - Left
$623.69Shipment Due On: 12/18/2020 - Made to Order - Typically Takes 4-16 Weeks
Fitment: Pontiac G8 2008-2009,
Chevrolet SS 2014-2016 -
Fitment: Pontiac G8 2008-2009,
Chevrolet SS 2014-2017 -
09-14 SRT8 Mopar Platform Outlaw Axles - Getrag Diff - 32 Spline Outers*
$1,999.00Left & Right*Mopar voids warranty on lowered cars; While our CV's are considered a wear item, it is worth noting that axles will see accelerated wear or possibly binding issues with lowered cars.Dropships from Gforce
Fitment: Mopar 300 SRT8 2009-2014,
Mopar Challenger SRT8 2009-2014,
Mopar Charger SRT8 2009-2014 -
DSS LC 2015+ Hellcat / SRT8 1400HP Full Chromoly Level 5 Direct Bolt-In Axle -Left
$755.99Shipment Due On: Overdue - Made to Order - Typically Takes 4-16 Weeks
Fitment: Mopar Challenger Hellcat 2015-2017,
Mopar Charger Hellcat 2015-2017 -
2015+ Mopar Charger/Challenger Renegade Axles - Inc. Scat Pack, SRT, and Hellcat*
$1,599.00Left & Right*Mopar voids warranty on lowered cars; While our CV's are considered a wear item, it is worth noting that axles will see accelerated wear or possibly binding issues with lowered cars.Dropships from Gforce
Fitment: Mopar 2015-2020 -
09-14 SRT8 Mopar Platform Renegade Axles - Getrag Diff - 32 Spline Outers*
$1,599.00Left & Right*Mopar voids warranty on lowered cars; While our CV's are considered a wear item, it is worth noting that axles will see accelerated wear or possibly binding issues with lowered cars.Dropships from Gforce
Fitment: Mopar 300 SRT8 2009-2014,
Mopar Challenger SRT8 2009-2014,
Mopar Charger SRT8 2009-2014 -
2015+ Mopar Charger/Challenger Outlaw Axles - Inc. Scat Pack, SRT, and Hellcat*
$1,999.00Left & Right*Mopar voids warranty on lowered cars; While our CV's are considered a wear item, it is worth noting that axles will see accelerated wear or possibly binding issues with lowered cars.Dropships from Gforce
Fitment: Mopar 2015-2020 -
DSS LX 2009-2014 (with Getrag Diff) 1400HP Chromoly Level 5 Axle -Right
$755.99Shipment Due On: 12/18/2020 - Made to Order - Typically Takes 4-16 Weeks
Fitment: Mopar 300 SRT8 2009-2014,
Mopar Challenger SRT8 2009-2014,
Mopar Charger SRT8 2009-2014 -
DSS LX 2009-2014 (with Getrag Diff) 1400HP Chromoly Level 5 Axle -Left
$755.99Shipment Due On: 12/18/2020 - Made to Order - Typically Takes 4-16 Weeks
Fitment: Mopar 300 SRT8 2009-2014,
Mopar Challenger SRT8 2009-2014,
Mopar Charger SRT8 2009-2014 -
DSS LX 2009-2010 5.7 (Non-Getrag) 1400HP Full Chromoly Level 5 Direct Bolt-In Axle -Left
$708.74Made to Order - Typically Takes 4-16 Weeks
Fitment: Mopar 300 C 2009-2010,
Mopar Challenger R/T 2009-2010,
Mopar Charger R/T 2009-2010 -
DSS LX 2005-2008 SRT-8 1400HP Full Chromoly Level 5 Axle/Hub Kit
$1,889.992006-2008 Charger SRT8 / 300C SRT8 / Challenger SRT8 / Magnum SRT8
1400HP Full Chromoly Level 5 Axle/Hub KitShipment Due On: Overdue - Made to Order - Typically Takes 4-16 Weeks
Fitment: Mopar 300 SRT8 2005-2008,
Mopar Charger SRT8 2006-2008,
Mopar Magnum SRT8 2005-2008 -
DSS LX 2005-2008 Charger 5.7/300C 5.7/Magnum 5.7/Challenger 5.7 600HP Level 2 Axle -Left
$566.99Made to Order - Typically Takes 4-16 Weeks
Fitment: Mopar 300 C 2005-2008,
Mopar Challenger R/T 2008,
Mopar Charger R/T 2006-2008,
Mopar Magnum R/T 2005-2008
Copyright© 2020 Wretched Motorsports